• Home
• Publications
• Experience
• Activities
• Talks
• Misc

Journals

• Bansode SN, Phalle VM, Mantha SS. Influence of Slurry Composition on Mould Properties and Shrinkage of Investment Casting. Transactions of the Indian Institute of Metals. 2020 Feb 15:1-1.


• Handikherkar, V.C. and Phalle, V.M., 2020. Vibration Analysis Based Spalling Defect Severity Assessment of Spur Gearbox Using a Dynamic Model. In Developments and Novel Approaches in Nonlinear Solid Body Mechanics (pp. 363-375). Springer, Cham.


• Patil, S.J., Khairnar, A.N., Phalle, V.M. and Limaye, P.K., 2020. Simulation of Self Compensating Hydrostatic Bearing Using Finite Element Analysis. In Developments and Novel Approaches in Nonlinear Solid Body Mechanics (pp. 377-388). Springer, Cham.


• Durge, N.K., Mantha, S.S. and Phalle, V.M., 2020. Small Capacity Plant for Post-harvest Process of Mango Worth to Indian Farmer. In Techno-Societal 2018 (pp. 387-398). Springer, Cham.


• Khakse, P.G. and Phalle, V.M., 2019. Comparative characteristics of hydrostatic conical hole-entry journal bearing with CFV, orifice and capillary restrictors. Tribology-Materials, Surfaces & Interfaces, 13(4), pp.239-254.


• Sangita Bansode, V.M.Phalle, S.S.Mantha. Productivity enhancement in investment casting foundry using automation technique in shelling operation. Industrial engineering Journal-Accepted.


• Sangita Bansode, V.M.Phalle, S.S.Mantha. Influence of Slurry Composition on Mould Properties and Shrinkage of Investment Casting. Transactions of the Indian Institute of Metals. Under review


• Sangita Bansode, V.M.Phalle, S.S.Mantha. Optimization of process parameters to improve dimensional accuracy of investment casting using Taguchi approach. Journal of Advance Mechanical Engineering-Vol. 11(4), 2019, pp 1-12


• Sangita Bansode, V.M.Phalle, Shankar S.Mantha. Taguchi Approach for Optimization of Parameters that Reduce Dimensional Variation in Investment Casting. Archieves of Foundry Engineering. - ISSN (1897-3310) Volume 19 Issue 1/2019 pp. 5-12.


• Sanjay R. Pawar, Vikas M. Phalle, "Performance Analysis of Hole Entry Worn Hybrid Conical Journal Bearing Compensated with Orifice Restrictor. Tribology International - Under Review.


• Sanjay R. Pawar, Vikas M.Phalle ,(2019) "Extended Version of Influence of wear on the cross coupled stiffness and damping coefficients of hybrid conical journal bearing," Journal of The Institute of Engineers (India) , Series C, (Springer)- Under Review.


• Sanjay R. Pawar, Vikas M. Phalle, (2019) "Influence of wear on the performance of capillary compensated hole entry hybrid conical journal bearing", Journal of Industrial Lubrication and Tribology,71(2), pp333-340.


• S R Pawar, Vikas M. Phalle, "Effect of wear on the performance of hole entry hybrid conical journal bearing employing constant flow valve compensation", accepted in in the Journal of IMechE, Part J: Journal of Engineering Tribology.


• Patil, Sangram S., and Vikas M. Phalle. "Fault Detection Of Anti-Friction Bearing Using Ensemble Machine Learning Methods", IJE TRANSACTIONS B: Applications Vol. 31, No. 11 pp.1972-1981, 2018.


• Sandeep S. Udmale, Sangram S. Patil, Vikas M. Phalle and Sanjay Kumar Singh, "A bearing vibration data analysis based on spectral kurtosis and ConvNet" Soft Computing, Springer.


• Ameya M. Mahadeshwar, Sangram S. Patil, Vishwadeep C. Handikherkar, Vikas M. Phalle "Influence of Operating Parameters on Unbalance in Rotating Machinery Using Response Surface Method" S&V: Sound and Vibration, Vol.52, Issue 5 , pp.12-21 , 2018


• Sumit Desai, S.S. Mantha, V.M. Phalle, "Design of a Novel Reconfigurable Wheelchair Product Incorporated with Sit-to-stand and Sit-to-sleep Capabilities using TRIZ and AHP", International Journal of Sustainable Design, 2018. (Scopus Indexed Journal, ISSN 1823- 5514)


• Sumit Desai, S.S. Mantha, V.M. Phalle. (2018). Design of a reconfigurable wheelchair with stand- sit-sleep capabilities for enhanced independence of long-term wheelchair users. Technology and Disability, 30(3), 135-151. (Scopus Indexed Journal, ISSN 1055-4181) DOI: 10.3233/TAD-180210


• Singh, Jaya, S. S. Mantha, and Vikas M. Phalle. (2018) "Analysis of technical and economic electricity saving potential in the urban Indian households." Sustainable Cities and Society (Elsevier), Accepted


• Ajay Kumar Gangrade, Vikas M. Phalle and S. S. Mantha (2018), "Performance analysis of a conical hydrodynamic journal bearing", Iranian Journal of Science and Technology, Transactions of Mech. Engineering, ISSN: 2228-6187 (Print); ISSN: 2364-1835 (Online). (Publisher: Springer International Publishing, indexed in Science Citation Index Expanded, SCOPUS, and Google Scholar).


• Ajay Kumar Gangrade, Vikas M. Phalle and S. S. Mantha (2018), "Parametric investigations of short length hydro-dynamically lubricated conical journal bearing", Jurnal Tribologi, Publisher, Malaysian Tribology Society (MYTRIBOS).


• Singh, Jaya, Shankar S. Mantha, and Vikas M. Phalle, "Characterizing domestic electricity consumption in the Indian urban household sector", Energy and Buildings, 170, pp. 74-82, 2018. DOI:- https://doi.org/10.1016/j.enbuild.2018.04.002


• Sumit Desai, S.S. Mantha, V. M. Phalle, "Comprehensive Needs Assessment Study and Deployment of QFD Targeted at New Wheelchair Design", Iranian Rehabilitation Journal, 15(4):377-388, 2017. DOI: - 10.29252/nrip.irj.15.4.377


• H.P.Khairnar, V. M. Phalle, S.S.Mantha."Friction coefficient depending on active friction radius with BPV and BTV in automobile disc braking system".International Journal of Engineering, science and technology. Vol. 9(3), pp. 41-50, 2017.


• P.G. Khakse, V.M. Phalle and S.S. Mantha, "Orifice Compensated Performance Characteristics of Hybrid Hole-entry Conical Journal Bearing,"in the Journal ofIMeche, Part J: Journal of Engineering Tribology 2016.


• P.G. Khakse, V.M. Phalleand S.S. Mantha, "Comparative Performance of a Non-recess Hole-entry Hybrid/Hydrostatic Conical Journal Bearing Compensated with Capillary and Orifice Restrictor," in the Journal of Tribology in lndustry,2016.


• P. G. Khakse, V. M. Phalle and S. S. Mantha, "Static Performance Characteristics of Hole-entry Hybrid Conical Journal Bearing," Published in International Journal of Global Technology Initiatives, vol.5(1), pp.D48-D54,2016.


• Gangrade A. K., and Phalle Vikas M., "Effect of clearance and aspect ratio on the performance of water lubricated hydrodynamic journal bearing," International Conference on Global Technology Initiatives, 5(1), D59-D64, 2016.


• H.P.Khairnar, V.M.Phalle, and S.S.Mantha. "Comparative frictional analysis of automobile drum and disc brakes".Tribology in Industry (Vol.38, No. 1)11-23. 2016.


• P. G. Khakse, V. M. Phalle and S. S. Mantha, "Performance Analysis of a Non-recessed Hybrid Conical Journal Bearing Compensated with Capillary Restrictors," Published inASME Journal of Tribology, vol.138(1), pp.011703-011709,2016.[DOI: 10.1115/1.4030808]


• Khairnar H. P., Phalle Vikas M. and S. S. Mantha, "Estimation of automotive brake drum-shoe interface friction coefficient under varying conditions of longitudinal forces using Simulink",Friction, September, Vol. 3(3),pp. 214-227, .


• S. M.Pawar, S. G.Jadhav, and V.M. Phalle, " CFD Analysis of Two Lobe Hydrodynamic Journal Bearing ", International Journal of Engineering Development and Research 2 (3 (Sept 2014)) ISSN: 2321-9939 (Impact Factor = 1.79)


• Vinayak D. Latake, and V.M.Phalle, "A survey paper on a factors affecting on selection of mechanical gripper", International Journal Of Engineering Development And Research ( IJEDR), pp.-47-51 2014, ISSN: 2321-9939


• Satish C. Sharma, Vikas M. Phalle, and S.C. Jain, "Performance of a noncircular 2-lobe multirecess hydrostatic journal bearing with wear", Industrial Lubrication and Tribology, Vol. 64, Issue 3, pp. 171-181, 2012.


• Satish C. Sharma,Vikas M. Phalle, and S. C. Jain,"Combined Influence of Wear and Misalignment of Journal on the Performance Analysis of 3-Lobe Three-Pocket Hybrid Journal Bearing Compensated with Capillary Restrictor," ASME Journal of Tribology, Vol. 134 / 011703-11, 2012.


• Satish C. Sharma, Vikas M. Phalle, and S. C. Jain, "Performance of a Noncircular 2-Lobe Multirecess Hydrostatic Journal Bearing with Wear", Industrial Lubrication and Tribology, Vol. 64 Issue: 3, pp. 171 - 181,2012.


• Satish C. Sharma,Vikas M. Phalle, and S. C. Jain, "Influence of Wear on the Performance of a Multirecess Conical Hybrid Journal Bearing Compensated with Orifice Restrictor," Tribology International,Vol.44,pp.1754-1764,2011.


• Satish C. Sharma, Vikas M. Phalle, and S. C. Jain, "Performance Analysis of a Multirecess Capillary Compensated Conical Hydrostatic Journal Bearing System," Tribology International. Vol.44 (5),pp.617- 626,2011.


• Vikas M. Phalle, Satish C. Sharma and S.C. Jain, "Influence of Wear on the Performance of a 2-lobe Multirecess Hybrid Journal Bearing System Compensated with Membrane Restrictor", Tribology International,Vol.44(4),pp.380-395,2011.

List of Publications in National Peer Reviewed Journals

• Phalle Vikas M., Gangrade A. K., and S. S. Mantha, "Performance Analysis of Conical Fluid Film Hydrodynamic Journal Bearing for various aspect ratio", Indian Journal of Tribology, July 2016.


• Sanjay R. Pawar, Vishwadeep C. Handikherkar, Vikas M. Phalle, 'CFD Analysis of Worn out Hole Entry Hybrid Conical Journal Bearing'. Tribo-India, International Conference, 13-15 December, 2018 presented at VJTI, Mumbai. And submitted to the IJT for publication

List of Papers Presented in Proceedings of International Conferences

• Dinesh Kamble, and Vikas M. Phalle, (2019), "Performance Analysis of Conical Hydrodynamic Bearing Under Different Eccentricity Ratio", International Conference on Non-Linear Solid Mechanics (ICoNSoM-2019), Rome, Italy, 16-19 June, 2019.


• Vishwadeep Handikherkar and Vikas M. Phalle, (2019), "Vibration Analysis Based Spalling Defect Severity Assessment of Spur Gearbox Using a Dynamic Model", International Conference on Non- Linear Solid Mechanics (ICoNSoM-2019), Rome, Italy, 16-19 June,2019.


• Sangram Patil, Vikas M. Phalle, and Faruk Kazi (2019), "Fault Detection of Rolling Element Bearing with Stationary Wavelet Transform and Random Forest", International Conference on Non- Linear Solid Mechanics (ICoNSoM-2019), Rome, Italy, 16-19 June, 2019.


• Phalle V.M. and Pawar S.R., "Dynamic Performance Analysis of Hole Entry Worn Hybrid Conical Journal Bearing Under Variation of Speed," ICoNSoM 2019, Roma, Italy, 16 th to 19 th . June,2019.


• Pawar S.R., Phalle V.M., "Comparative Performance Analysis for Various Compensating Elements of Hole Entry Worn Hybrid Conical Journal Bearing with Variation of Speed," ICoNSoM 2019, Roma, Italy, 16 th to 19 th . June,2019.


• Sanjay R. Pawar, Prashant G. Khaske Vikas M. Phalle, "Performance analysis of non-recessed hole-entry hybrid/hydrostatic conical journal bearing using CFD", International conference on Materials, Manufacturing and Design Engg. iCMMD-2016, BATU Lonere. 20-21 December, 2016.


• Singh, Jaya, S. S. Mantha, and V. M. Phalle. (2019). "Analysis of passive retrofitting measures for reduced electricity demand." International Conference on  Nascent Technologies in Engineering (ICNTE), 2019, IEEE. (Accepted for publication)


• Singh, Jaya, S. S. Mantha, and V. M. Phalle. (2019). "Envelop insulation for energy efficient smart buildings in India". International Conference on Delivering Future Infrastructure for Developing Countries. (Accepted for publication)


• Ajay Kumar Gangrade, Vikas M. Phalle, "Influence of eccentricity ratio on stability performance of conical hydrodynamic journal bearing", 2nd International Conference on New Frontiers in Engineering, Science & Technology (NFEST 2019), National Institute of Technology, Kurukshetra (NITK), 18 th to 22 nd Feb 2019.


• Nandu Durge, Small Capacity Plant for Post-harvest process of Mango - Worth to Indian Farmer , Techno-Societal 2018


• Vikas M. Phalle, Sanjay R. Pawar, "Effect of Wear on The Static Performance Characteristics of Non-Recessed Hole Entry Hydrostatic Conical Journal Bearing", STLE 2018, Minneapolis, USA. 20-24 May,2018.


• Nandu Durge, S S Mantha, Vikas M Phalle "Design and development of small capacity mango process plant", 3rd International Conference on Intelligent Manufacturing and Automation Engineering, held in Tokyo, Japan on September 27-30, 2019.ICIMA2018


• Patil, Sangram and Khairnar, Tushar and Kalhapure, Vaibhav A. and Phalle, Vikas M., Vibration Based Fault Detection of Deep Groove Ball Bearing Using Data Mining Algorithm (December 21, 2017). International Conference on Advances in Thermal Systems, Materials and Design Engineering (ATSMDE2017). http://dx.doi.org/10.2139/ssrn.3101405 .


• Sangram S. Patil, Vikas. M. Phalle,(2016),"Fault Diagnosis of Anti-Friction Bearing Using Daubechies Wavelet", Proceedings of 6th International Congress On Computational Mechanics And Simulation (ICCMS2016), IIT Bombay, Mumbai, India,pp.1458-1461


• Vikas M. Phalle, Sanjay R. Pawar, Sangram S. Patil, "Effect of Speed on the Performance Characteristics of Non- Recessed Worn Hybrid Conical Journal Bearing for Different Semi Cone Angles," Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE2018, Pittsburgh, PA, USA. 9-15 November, 2018.


• Sumit Desai, Shankar Mantha, Vikas M. Phalle, Sangram Patil, Vishwadeep Handikherkar, "Design and prototype development of a reconfigurable wheelchair with stand-sit-sleep configurations," Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE2018, Pittsburgh, PA, USA. 9-15 November, 2018.


• Sangram Patil, Aum Patil, Vishwadeep Handikherkar, Sumit Desai, Vikas M. Phalle, Faruk S Kazi, "Remaining useful life (RIL) prediction of rolling element bearing using random forest and gradient boosting technique," Proceedings of the ASME 2018 International Mechanical Engineering Congress and Exposition, IMECE2018, Pittsburgh, PA, USA. 9-15 November, 2018


• Pramodkumar R. Mishra, Vishwadeep C. Handikherkar, Sanjay Pawar, Vikas M. Phalle, "CFD Analysis of Worn out Hole Entry Hybrid Conical Journal Bearing", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Ganesh G. Bhoye, Sanjay R. Pawar, S.P. Gajare, Vikas M.Phalle, "Performance Analysis of Four Recess Hybrid Conical Bearing using CFD", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Sanjay R. Pawar, Vikas M.Phalle, "Effect of journal speed on the static performance characteristics of orifice compensated hole entry, worn hybrid conical journal bearing", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13th -15 th December, 2018.


• Ajay Kumar Gangrade, Vikas M. Phalle, S. S. Mantha, "Stability Analysis of Various Lengths Conical Hydrodynamic Bearing for Variable Load Conditions", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Prasad D. Kulkarni., V. M. Phalle, "Influence of various parameters on performance of fluid film Journal Bearing operating in Turbulent flow Regime - Overview", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Vishwadeep C Handikherkar, Vikas M Phalle, "Fault Diagnosis of Bevel Gear by Using Random Forest and Adaptive Boosting Technique", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Abhishek Prakash Murkar, Ajay Kumar Gangrade, Vikas M. Phalle, "Effect of Erosion-Corrosion and Other Tribological Parameters in Failure Analysis of Heat Exchangers", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Sangram Patil, Aum Patil, Vikas Phalle, "Life Prediction of Bearing by using Adaboost Regressor", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Abhishek N Khairnar, Sumit J Patil, V M Phalle, P K Limaye, "Design of hydrostatic bearing using optimization of Self-compensating orifices for high stiffness in linear hydraulic actuator", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• M. R. Valse, V. M. Phalle, "A Review of Temperature Variation and its Effect in Hydrodynamic Journal Bearing", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Dinesh H. Kamble, Vikas M. Phalle, S. S. Mantha, "Effect of Semi-cone angle on the performance of conical hydrodynamic air lubricated journal bearing"", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Aviraj P. Nirmale. Sangram S. Patil, Vishwadeep C Handikherkar, Vikas M Pzlysis and mechanical analysis of gripper finger", TRIBOINDIA-2018- International Conference on Tribology at VJTI, 13 th -15 th December, 2018.


• Sumit Desai, S. S. Mantha, and V. M. Phalle, "Assistive Technology solution for disabled population of India", International IEEE Conference on Current Trends in Computer, Electrical, Electronics and Communication, ICCTCEEC, IEEE, 2017.


• Sumit Desai, S. S. Mantha, and V. M. Phalle, "Design and prototype development of a reconfigurable wheelchair with stand-sit-sleep configurations", International Mechanical Engineering Congress and Exposition (IMECE 2018), ASME, 2018. (Under Review).


• Sumit Desai, S.S. Mantha, V.M. Phalle and Patil, S. (2018, September). Design, Modeling and Simulation of a Reconfigurable Wheelchair with Stand-sit-sleep Facilities. In IOP Conference Series: Materials Science and Engineering (Vol. 417, No. 1). IOP Publishing. (Indexed by Scopus, Thomson Reuters (WoS)) (Presented at International conference on mechanics and mechatronics research ICMMR-2018, Tokyo University of Science, Japan)


• N. K. Durge, S. S. Mantha, and V. M. Phalle, "Design and development of small capacity mango plant", International Conference on Intelligent Manufacturing and Automation, Springer proceedings, 2018. (Accepted for publication).


• Sangita Bansode, Vikas M. Phalle and S. S. Mantha,(2017), "Optimized Design of Feeding System for Complex Steel (CF8) Investment Casting to Improve Quality and Productivity", Advanced in Thermal System, Materials and Design Engineering (ATSMDE-2017) - International Conference, Paper No.-MM-054, 21-22 December, 2017.


• Phalle Vikas M, Pawar S. R. and Khaske P. G. Influence of speed on the static performance characteristics of hole entry worn hybrid conical journal bearing, , 16 th EDF Pprime Workshop France, 5-6 October,2017.


• Phalle Vikas M, and Pawar S. R., Influence of speed on the dynamic performance characteristics of hole entry hybrid worn conical journal bearing compensated with capillary restrictor, 9 th international conference on industrial tribology ICIT-2017, 6-9 December,2017


• Ajay Kumar Gangrade, Vikas M. Phalle and S. S. Mantha,(2017), "Effect of Aspect ratio and Semi Cone Angle on the Stability Behavior of a Conical Hydrodynamic Journal Bearing", Advanced in Thermal System, Materials and Design Engineering (ATSMDE-2017) - International Conference, Paper No.-DE-017, 21-22 December, 2017.


• Sangram S. Patil, TusharKhairnar, Vaibhav A. Kalhapure and Vikas M. Phalle,(2017), "Vibration based Fault Detection of Deep Groove Ball Bearing using data Mining Algorithm", Advanced in Thermal System, Materials and Design Engineering (ATSMDE-2017) - International Conference, Paper No.-DE-045, 21-22 December, 2017.


• Vishwadeep Handikherkar, Samadhan Dhangar, Sangram S. Patil and Vikas M. Phalle,(2017), "Stress Analysis of Parallel Misaligned Spur Gear Pair", Advanced in Thermal System, Materials and Design Engineering (ATSMDE-2017) - International Conference, Paper No.-DE-049, 21-22 December, 2017.


• Sanjay R. Pawar and Vikas M. Phalle, (2017), "Influence of Wear on the Dynamic Performance Characteristics of Non-recessed Hole Entry Hydrostatic Conical Journal Bearing", Advanced in Thermal System, Materials and Design Engineering (ATSMDE-2017) - International Conference, Paper No.-DE-050, 21-22 December, 2017.


• Vikas M. Phalle, and SangramPatil, "Fault Detection of Anti-friction Bearing using AdaBoost Decision Tree (Paper ID #310)" for 2017 International Conference on Computational Intelligence: Theories, Applications and Future Directions has been received. (Submitted)


• Sumit Desai, S.S. Mantha, V. M. Phalle, "Advances in Smart Wheelchair Technology", IEEE International Conference on Nascent Technologies, 27 th -28 th January 2017, Vashi. pp. 1-7. IEEE, 2017. DOI:  10.1109/ICNTE.2017.7947914 .


• Jaya Singh, S.S. Mantha, V. M. Phalle, "Future Prospects of Energy Efficient Smart Homes in India," IEEE International Conference on Nascent Technologies, 27 th -28 th January 2017, Vashi, International Conference on. IEEE, pp. 1-6, 2017. DOI: 10.1109/ICNTE.2017.7947931


• Sanjay R. Pawar, Prashant Khakse, and Vikas M. Phalle, "Performance Analysis of Hydrostatic/Hybrid Conical Journal Bearing Using CFD", In: proceedings of theInternational Conference on Materials, Manufacturing and Design Engineering, at Dr. BabasahebAmbedkar Technological University, Maharashatra, 20 th  and 21 st  December, 2016


• H.P.Khairnar, V. M. Phalle, and S.S.Mantha. "Optimisation of automobile brake drum-shoe adherence considering braking force, cylinder force and distance of frictional force". Conference


• SangramPatil, and Phalle Vikas M., ‘Fault Diagnosis of Anti Friction Bearing Using Daubechies Wavelet’,In: proceedings of the sixth International Congress on Computational Mechanics and Simulation (ICCMS2016) is held on 27 th June - 1 st July 2016 at Indian Institute of Technology Bombay (IITBombay), India, organized and hosted jointly by Department of Civil Engineering, IIT Bombay and Department of Structural Engineering, VeermataJijabai Technological Institute (VJTI) Mumbai, under the auspices of Indian Association for Computational Mechanics (IndACM).


• Vasim Sayyad, Sangram S. Patil, Vishwadeep C. H, Phalle Vikas M., ‘Effect of Centre Distance Variation on Performance of Spur Gear’In: proceedings of the sixth International Congress on Computational Mechanics and Simulation (ICCMS2016) is held on 27 th June - 1 st July 2016 at Indian Institute of Technology Bombay (IITBombay), India, organized and hosted jointly by Department of Civil Engineering, IIT Bombay and Department of Structural Engineering, VeermataJijabai Technological Institute (VJTI) Mumbai, under the auspices of Indian Association for Computational Mechanics (IndACM).


• Sayyad V.M., SangramS.Patil, Vishwadeep C. H, Phalle Vikas M., ‘Effect of Friction Between Punch & Die on Springback in 60 Degree V Bend’, In: proceedings of the sixth International Congress on Computational Mechanics and Simulation (ICCMS2016) is held on 27 th June - 1 st July 2016 at Indian Institute of Technology Bombay (IITBombay), India, organized and hosted jointly by Department of Civil Engineering, IIT Bombay and Department of Structural Engineering, VeermataJijabai Technological Institute (VJTI) Mumbai, under the auspices of Indian Association for Computational Mechanics (IndACM).


• P. G. Khakse, V. M. Phalle and S. S. Mantha, "Effect of Speed on Performance Analysis of Hole-Entry Hybrid Conical Journal Bearing for Different Semi Cone Angles,"In: proceedings of, STLE 71 th Annual Meeting & Exhibition, at Bally's Las Vegas Hotel & Casino in Las Vegas: Annual Meeting Program Guide: Nevada (USA), p.159, May 15-19, 2016. 


• P.G. Khakse, V.M. Phalle and S.S. Mantha, "Influence of Semi Cone Angle on Performance of a Non- recessed Hybrid Conical Journal Bearing," Proceedings of the ASME 2015 International Mechanical Engineering Congress & Exposition, IMECE15,Houston, Texas, USA, Nov. 13-19, 2015. "Registration support by National Science Foundation under grant CMMI-1549958".ASME Proceedings | Advances in Multidisciplinary EngineeringPaper No. IMECE2015-50877, pp. V015T19A034; 8 pages


• Khairnar H. P., Phalle Vikas M and S. S. Mantha, "Optimisation of Vehicles Brake Disc-Caliper Adherence Considering Operating And Geometric Parameters To Improve Active Safety Control", In proceedings of SSC-15.SVNIT, Surat, 10-11April 2015.


• Gangrade A. K., Phalle Vikas M and S. S. Mantha, "Influence of Semi Cone Angle on the Performance of a Conical Hydrodynamic Journal Bearing" Proceedings of 2015 STLE 70 th Annual Meeting & Exhibition, to be held May 17-21, 2015 held at Dallas, Texas (USA) at the Omni Hotel, USA.


• Prashant Khakse, Phalle Vikas M and S. S. Mantha, "Comparison of Performance Analysis of Non-recess Hydrostatic/Hybrid Conical Journal Bearing" Proceedings of 2015 STLE 70 th Annual Meeting & Exhibition, to be held May 17-21, 2015 held at Dallas, Texas (USA) at the Omni Hotel, USA.


• Mrs. SangitaBansode,V. M. Phalle, and S. S. Mantha, "Optimised Feeding System For Investment Casting To Reduce Dimensional Variation", Proceedings of 63rd Indian foundry Congress , (The Institute Of IndianFoundrymen ), 27 th  Feb - 1 st  March 2015 Indian Expo center Greater Noida Delhi


• Ajay Kumar Gangrade, Vikas M. Phalle, and S.S. Mantha, "Performance Analysis of a Hydrodynamic Journal Bearing", PhD-Colloquium - 2014, March 3 rd & 4 th , 2014, VJTI, Mumbai.


• Ajay Kumar Gangrade, Vikas M. Phalle, and S.S. Mantha, "Performance Analysis of a Conical Fluid Film Hydrodynamic Journal Bearing", Ph. D.-Colloquium _ March 17 & 18, 2015 VJTI, Mumbai, Poster No. - ME-03 ID No. - 129020103


• Gangrade A. K. and Phalle Vikas M. "Performance Analysis of Worn Hydrodynamic Journal Bearing Using CFD", Proc. of International Conference on Global Technology Initiatives (ICGTI-2015) on 29 & 30 March 2015. (International Journal of Global Technology Initiatives 4 (1), D43-D47)


• Bhandare R. V., Phalle Vikas M and Gangrade A. K., "Influence of Journal Misalignment on the Performance of Hydrodynamic Journal Bearing System", in the Proceedings of Advances in Materials and Product Design (AMPD 2015), held at S. V. National Institute of Technology, Surat, on Jan 10-11, 2015.


• Mrs. Sangita Bansode, V. M. Phalle, and Dr. S. S. Mantha, "Influence of Feeding System On The Distortion Of Investment Casting", Proc. Of 62nd IFC, Gandhinagar, Gujarat, India7-9 February,2014.


• Gangrade A. K., PhalleVikas M and S. S. Mantha, "Influence of temperature and semi cone angle on the performance of Conical hydrodynamic journal bearing », Proc. of 12th EDF/Pprime Workshop: Futuroscope, France September 17 th & 18 th , 2013, Poster No. - ME-03ID No. - 129020103


• Vikas M. Phalle and Satish C. Sharma, "Influence of Wear on the Performance of Four-Pocket/Six-Pocket Conical Journal Bearing System compensated with Constant Flow Valve Restrictor", 2013 STLE Annual Meeting & Exhibition, to be held May 5-9, 2013 at the Detroit Marriott at the Renaissance Center in Detroit, Michigan, USA.


• Aniket A. Takale, Vikas M. Phalle and Ajay Kumar Gangrade, "CFD analysis for pressure distribution and performance analysis of a hydrodynamic journal bearing system", 2013 International Conference on Advances in Mechanical Engineering, to be held May 29-31, 2013 at COEP, Pune, Maharashtra, India.Vikas M. Phalle and Santosh A. Bansode, "CFD analysis with temperature effect on theperformance of a finite length hydrodynamic journal bearing system", 2013 International Conference on Advances in Mechanical Engineering, to be held May 29-31, 2013 at COEP, Pune, Maharashtra, India.


• Vikas M. Phalle and Prathamesh S. Kolte, "Optimial design for patch reinforcement in notched composite plate", 2013 International Conference on Advances in Mechanical Engineering, to be held May 29-31, 2013 at COEP, Pune, Maharashtra, India


• Vikas M. Phalle and Prathamesh S. Kolte, "Analysis and quantifying effects of patch covering for hole in composite plates", 2013 International Conference on Advances in Engineering and Technology, to be held May 15-17 at Sinhgad Institute of Technology and Science, Lonavala, Pune, India


• Vikas M. Phalle and Manoj Botre, "Optimization of CSPFI of maneuvering assembly using ANNOVA", 2013 International Conference on Advances in Mechanical Engineering, to be held May 29-31, 2013 at COEP, Pune, Maharashtra, India


• Vikas M. Phalle and Manoj Botre, "Finite Element Analysis of CSPFI of Manoeuvering assembly", 2013 International Conference on Advances in Engineering and Technology, to be held May 15-17 at Sinhgad Institute of Technology and Science, Lonavala, Pune, India


• Vikas M. Phalle and Kashyap Y Anandpara, "Green Ideas Competition", 2013 IIT Bhu, India


• Vikas M. Phalle and Kashyap Y Anandpara, "Ideas and Innovation in green Technology", 2013 Amity Delhi, India


• Vikas M. Phalle and Satish C. Sharma, "Influence of Wear Depth Parameter on the Performance of Four- Pocket Hybrid Conical Journal Bearing system", Proc. Of 8th International Conference on Industrial Tribology (ICIT-2012), 7 - 9 December 2012, Pune (India).


• Vikas M. Phalle and Satish C. Sharma, "Performance Analysis of Worn Misaligned 4-Lobe Multirecess Hybrid Journal Bearing System Compensated with Orifice Restrictor" Proceedings of the ASME/STLE 2012 International Joint Tribology Conference, IJTC2012, Denver, Colorado, USA, IJTC2012- 61018, October 8- 10, 2012,


• Vikas M. Phalle, Satish C. Sharma and S.C. Jain, "Influence of Wear on the Performance of a 2-Lobe Four- Pocket Hydrostatic Journal Bearing Compensated with Capillary Restrictor", Proc. of the 5th International Conference on Advances in Mechanical Engineering (ICAME-2011), S.V. National Institute of Technology, Surat, Gujarat, India, June 06-08, pp.783-787,2011.


• Satish C. Sharma, Vikas M. Phalle, and S. C. Jain, "Influence of Wear and Method of Compensation on the Performance of 2-Lobe Multirecess Hybrid Journal Bearing System",STLE-2011 Annual Meeting & Exhibition, Hilton Atlanta,255 Courtland St Ne,Atlanta, Ga. (USA), May 15-19, 2011.


• Vikas M. Phalle, Satish C. Sharma and S. C. Jain, "Performance characteristics of 3-lobe three-pocket hybrid journal bearing system compensated with orifice restrictor by considering the influence of wear," ICIT-2010, Ranchi, 2-4 Dec. 2010


• Satish C. Sharma, Vikas M. Phalle and S. C. Jain, "Performance of Noncircular 2-Lobe Multirecess Constant Flow Valve Compensated Hybrid Journal Bearing by Considering Wear", STLE 2010, Bally's Las Vegas Hotel and Casino, Las Vegas, Nevada, May 16-20, 2010.


• Vikas M. Phalle, Satish C. Sharma, and S. C. Jain, "A Study of Noncircular 2-Lobe Multirecess Hydrostatic Worn Journal Bearing with Orifice Compensation", 54th Congress of ISTAM (An International Meet), Netaji Subhas Institute of Technology, New Delhi, December 18-21, 2009.


• E. Vijaya Kumar, Vikas M. Phalle, Satish C. Sharma and S. C. Jain, "Performance of 4-pocket capillary compensated worn hybrid journal bearing", 3rd international Congress on Computational Mechanics and Simulation (ICCMS09) IIT-Bombay, Mumbai-400 076, INDIA, December 1st -5th, 2009.


• E. Vijaya Kumar, Vikas M. Phalle, Satish C. Sharma and S.C. Jain, "Analysis of a Worn Multirecess Hydrostatic Journal Bearing System", Proceedings of ASME IDETC/CIE 2009, San Diego, California, USA, Aug. 30- Sep.2, 2009.


• V. M. Phalle and Yogesh S. Dangle, "CFD Performance Analyasis of Hydrodynamic Journal Bearing", Proceedings of the International Conference on Industrial Tribology - 2008.


• Vivek S. Meshram and V. M. Phalle, "Design of crankshaft journal bearing and fluid   flow analysis   using CFX software", Proceedings of the International Conference on Industrial Tribology, ICIT-2006

List of Papers presented in proceedings of National Conferences

• Sangita Bansode, V.M.Phalle, S.S.Mantha. Influence of feeders in distortion of investment casting. 62nd Indian Foundry Congress ,7-9 Feb 2014, Gandhi Nagar, Ahmedabad


• Sumit Desai, S.S. Mantha, V.M. Phalle. (2018). Design of Wheelchair Considering Needs of Indian User. National Congress on Disability Studies, Vasant Kunj, New Delhi, 5-8 Oct, 2018. (Organized by Society of Disability Research Studies (SDRS) and GOI, presented at Indian Spinal Injuries Centre, New Delhi)


• Sanjay R. Pawar, Vikas M.Phalle, “Influence of wear on the cross coupled stiffness and damping coefficients of hybrid conical journal bearing,” Proceedings of the National Conference on Emerging Trends in Mechanical Engineering (NCETME-2019), VIT Pune, 7-8 Feb, 2019.


• Sanjay R. Pawar, Vikas M. Phalle, “CFD Analysis of Worn Hydrostatic Journal Bearing”, National Conference at Raisoni College Pune, 23rd Feb, 2018.


• V. M. Phalle, S R Pawar, S. S. Mantha, “Development of customised experimental test-rig for hydrodynamic conical journal bearing” Research & Developments in Mechanical Engineering (NCRDME-2019)" G H Raisoni College of Engineering and Management, Wagholi Pune held on 1st & 2nd March 2019.


• V. M. Phalle, A. K. Gangrade , S. S. Mantha, “Development of customised experimental test-rig for hydrodynamic conical journal bearing” 4th National conference on Research & Developments in Mechanical Engineering (NCRDME-2019)" held on 1st & 2nd March 2019.


• Abhishek Prakash Murkar, Ajay Kumar Gangrade, Vikas M. Phalle, Microstructural and behavioural study of Intergranular Stress Corrosion Cracking in process equipments, Proceedings of the National Conference on Emerging Trends in Mechanical Engineering (NCETME-2019), VIT Pune, Feb. 7-8 2019


• Ramesh Bhandare, Vikas M. Phalle, A. K. Gangrade, “To Investigate Effect of Misalignment on the Performance of Hydrodynamic Journal Bearing”, Proc. of National Tribology Conference – 2016, “NTC2016” IIT (BHU) Varanasi, India, December 8-10, pp. 1-2,2016.


• Prashant G. Khakse, Vikas M. Phalle and S.S. Mantha, “Performance Behaviourof Non-Recessed Conical Journal Bearing”, Proceedings of NationalConference on Advances In Mechanical Engineering Techniques (AMET-2015) March12-13, 2015


• Phalle Vikas M., Gangrade A. K., and S. S. Mantha, “ Performance Analysis of Conical Fluid Film Hydrodynamic Journal Bearing for various aspect ratio”, Proceedings of National Tribology Conference PES University, Bengaluru & Tribology Society of India (TSI), – 2014, December 15-17, 2014


• Sangita Bansode, V.M.Phalle, A.S.Rao ,“Rapid prototype a rapid approach for investment casting”,National Conference ,SabooSiddikiq College of Engineering, 3-5 Jan 2013, Byculla, Mumbai.


• Vikas M. Phalle, Satish C. Sharma and S.C. Jain, “Reduction of Friction of 2-Lobe Four Pocket Hybrid Journal Bearing by Offsetting Bearing Shells”, Proc. of National Tribology Conference – 2011, I.I.T.R.,Roorkee, Uttarakhand, India, December 8-10, pp.125-130, 2011.


• S. K. Kamble and Vikas M. Phalle, Seminar on Mechanical Vibration- Analysis and Diagnosis at Pravara Rural Engineering College, Loni, Maharashtra, 24-26 March 2007


• Vikas M. Phalle and Sonar, “Tribo Design”, Proceedings of “National Conference on Sun Rising technologies” (NCSRT-05), Parshvanath College of Engineering, Thane, Mumbai (India), 18-19 November 2005.